Construction & Home

Estimate concrete volume in cubic yards, feet, and meters, plus 40, 60, or 80 lb bags for slabs, pads, and rectangular pours with waste.

Estimate wall-paint quantity from room dimensions, openings, coats, coverage and a practical allowance.

Estimate tiles, edge cuts and full boxes using the project size, tile dimensions, grout gap and waste allowance.

Calculate floor area, cutting waste and the number of complete flooring boxes or rolls to purchase.

Estimate whole drywall sheets for walls and an optional ceiling using room dimensions, panel size and waste.

Calculate mulch volume and full bags from landscape-bed area and the finished depth you intend to maintain.

Estimate topsoil volume, bags or mass from the measured area, fill depth and the supplier’s product information.

Estimate whole pavers for a patio or walkway using actual dimensions, joint width, pattern and cutting waste.

Estimate uniform risers, tread count, total run, angle and stringer length for a straight stair concept.

Estimate fence panels, posts and rails from route length, gates, section spacing and closed-perimeter conditions.

Estimate deck-board rows, pieces and linear length using actual board dimensions, spacing, direction and waste.

Estimate brick quantity from net wall area, the brick face, mortar joint, openings and practical waste.